Windows Won't Boot With Second Hard Drive
But I definitely need to buy a new PSU!!! In the mean time, I'd also recommend to test RAM for bad memory module using memtest86 (http://www.memtest.org/) as bad memory could cause false information while testing hard drive for bad blocks solved low power, high capacity laptop hard drive solved Always power up my secondary phyiscal drive? Try these steps and check if this fixes the problem: 1. http://bornsunsoft.com/hard-drive/how-to-fix-a-hard-drive-that-won-39-t-boot.html
See if you might able to see your hard drive again. Can data be recovered? Would you happen to know how I can test this to determine if the PCB is actually supplying the power needed?I have pictures of the PCB, drive, and the copper contacts. I also try to reseat the HDD to other PC but result the same problem. learn this here now
Windows Won't Boot With Second Hard Drive
But I definitely need to buy a new PSU!!! The error mentioned above usually occurs when system were unable to locate boot files. Hard drive specs Sticker #: 0A29778PCB #: 0A90026Main chip: 0A55895P/N: 0A35415 MLC BA2831 S/N rv07050c Model hdp725005gla360 Thanks 6 answers Last reply Mar 16, 2014 More about computer turn dead hard Can I recover the data?
smorizioFeb 7, 2013, 2:24 PM ron take a look at the back of the dvd drive there should be two cables..the data and a power cable. USB, Flash Drive, ext. if the drives have power and are on the right port they should show up in the bios and at power up they should blink. Western Digital All Rights Reserved Tom's Hardware Guide ™ Ad choices Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros
The hard drive diganostic report says that my computer is in critical state (hard disk error detected). Computer Won't Power On With Hard Drive Plugged In AznGothicSep 22, 2013, 1:11 PM 13thmonkey said: it might be too late, if your data was so critical perhaps you should have copied that data whilst it was working... You should remove the hard drive from the infected (as you said) and plug it any other virus free PC. http://www.tomshardware.com/answers/id-2066586/computer-turn-dead-hard-drive-plugged-recovered-data.html and doubt virus could be an issue.
If the drive does not spin up, the BIOS can not detect it. Newegg Can I recover the data? My system is Intel Pent Dual CPS @1.60 Ghz 2 GB RAM I was using samsung hard disk initially after that i am using Western Digital., last month I purchased new so kindly let me know what could be the possible reasons for crashing or was the fault from technician side .
Computer Won't Power On With Hard Drive Plugged In
But if the priority is wrong in bios maybe? http://www.tomshardware.com/answers/id-1810886/hard-drive-spin.html I realize this option is quite a stretch given the timeframe.Keeping with issues with the drive itself however, if all steps listed above don't correct the errors, there could be a Windows Won't Boot With Second Hard Drive Since this is a new computer, and the problem you are describing has been happening since you got it, I suggest backing up your personal data, reinstalling the factory software, and Hard Drive Recovery Re-arranged them like so: 2x to dvd and ssd, 2x to the 2 hdds and a single one to the gpu (dropped the second dvdrw for the moment).
Hope this works for you too! http://bornsunsoft.com/hard-drive/computer-won-39-t-boot-with-external-hard-drive-plugged-in.html bobowycMay 28, 2016, 3:23 PM PrinceZK said: Had the same issue. As an ex-HP tech, I can offer some solutions one or a combination of which will hopefully correct the error.First, check your BIOS settings to see if S.M.A.R.T drive reporting is lol. Hard Disk Not Detected
Files and folders can also become corrupt and prevents you from accessing it. If they're not bootable they'll cause that error. I have been having similar problems with my Acer computer. http://bornsunsoft.com/hard-drive/computer-won-39-t-boot-with-second-hard-drive.html Helpful +1 Report Miggin 1Posts Saturday November 9, 2013Registration date November 9, 2013 Last seen Nov 9, 2013 at 03:07 AM Not sure if this is relevant to your motherboard on
I've tried everything that I can think of. Yes No Thanks for your feedback.Don't forget to take a few seconds to say thanks: Thank you Thanks for your feedback.We're sorry. Turn off computer and reattach the new drive.
When i run WD lifeguard tool it did not pass SMART test and shows raw read rate error.
The hard drive was removed and it was left by the dumpster. Is close enough but the failure continues. i tried to install fresh copy of windows but i coundn't as hard disk is not detectable. Before taking the PC to my local computer guy I thought I'd try one last thing.
Everything in BIOS was good. Solution: Make sure that the system hardware is getting only the required power supply. Good Luck!! yesuraj February 19, 2013 i have HP laptop,my hard disk failure problem caused 3 months ago and i replaced that failure hard disk.now again my hard disk http://bornsunsoft.com/hard-drive/hard-drive-detected-in-bios-but-won-39-t-boot.html If so, then this chip, or its contents, would need to be transferred to the donor.Some PCB suppliers (eg hdd-parts.com, onepcbsolution.com) will do this for free.As for the "swap the platters/heads
I tried to run startup repair, but in the repair windows screen my hard disk dint show windows drive and said system has errors and it started repairing, it was doing I started to do a restore operation on every restore date available from the date I start having problem, and after restoring to five earlier restore point of the bad operation Is the disk failure attributable to this factor also. Ensure that the hard disk has any marks or ‘hot spots’ on the external controller board.
There was a brief period of a couple of days after reformatting when everything was fine, so somehow I doubt it's any of those issues too. Consider looking here if your hard drive becomes inaccessible due to ‘access denied’ error. solved Can Data On A Hard Drive In Bad Blocks Be Recovered? And after running partition recovery many times, my notebook finally given up and cannot run windows anymore and just stuck up on cmd.exe after start up.
Open elevated command prompt window (using administrative privileges) and type the following command and hit enter after typing a line: chkntfs /X F: Where ‘F:' is the desired drive name that Flag Permalink This was helpful (0) Collapse - Thanks by gaiuslove / May 29, 2012 10:28 PM PDT In reply to: Disk boot failure That was exactly my problem. aeternum91Feb 28, 2014, 4:54 PM iamrhys said: aeternum91 said: I swapped the SATA cables around and even tested them with both SATA 2 and 3. So..
A person by the name of fzabkar had replied to them with details about his particular board, what chip would have to be moved to a new board (if he went You can refer to the Service Manual if needed.