Solved: Problem Solved: Freezing HDD With Clicking Noise WORKS WELL!
Thanks Stellar for introducing such a great tool with us and thanks for sharing the post with us. music and videos can always be found online again but your pictures and documents most likley won't. MrEdOfCourse The problem with this article is that you went straight to $$$. Sometimes money isn't an option, or not even close to being worth what's on the drive. You may have pulled the plug on the drive while it was still writing - always use the "safely remove hardware" icon to power down and disconnect the drive before removing have a peek here
Joel Hruska Mr. Don't let the drive hit the floor though. If No-boot then... Remove the drive, grab it, and shake the hell out of it: "What could it hurt? other
do i have to export my data to another HD or just reboot? but still can't be accessed. Understanding what 12 beeps meant, as opposed to 6 beeps or 13, might have narrowed down the cause for the failure.
Tell them repair is good for farmers, good for consumers, and good for businesses. I was advised to back up the data before shutting down the system as "the slam" doesn't always work and seldom works a second time.Fortunately, once was enough in this case. Oliver Powell Updated on February 14, 2017 File Recovery 28 Comments Nowadays, with the increasing development in technology, hard drives are also improving, including storage capacity, speed, compact size, etc. So this technique will work just as well with a Mac formatted hard drive as it does with a PC formatted hard drive.
After reconnecting it to the computer it took a while and it still made those clanking noises BUT after resetting the machine for at least three times the drive miraculously came To put the hard drive in the freezer will naturally cool the plates and reading head arms. Tried changing USB cables, power bricks, uninstalling all USB controllers etc. http://www.tomshardware.com/answers/id-3228969/clicking-sound-hard-disk-freezes.html Recovery via a BartPE disk with the DIX plugin to get the data back is not difficult.
It is really annoying. Now place the entire ensemble in the freezer, as close to the cooling element as possible, and leave it for at least 24 hours. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. jared johnston Reply June 30, 2013 It can be less jam Reply February 15, 2011 my harddrive 500g will not let me save anything from my logic or computer e.g pictures.
Makusi Reply July 7, 2010 Kevin, you should try pouring liquid nitrogen and maybe it will work?? http://www.thetechmentor.com/posts/put-your-hard-drive-in-the-freezer-to-recover-data/ I had seen this posting about freezing the hard drive to get it to work. Have a drive ready to put it on. Anyways after messing around I finally decided to make sure nothing else using power was connected to the front USB port and BINGO my WD passport drive was working.
No risk of condensation that way. navigate here Took me about 4 hours to check the total drive! I held my breath and got my external hard drive plugged in and I swear on my childrens lives I got almost two hours of it working. The gold contact that was supposed to be there, as evidenced by the other 19, was all-but gone. It was the only thing that looked even slightly damaged.
Thanks everyone for helping me out. This year, New York could be the first state in the nation to pass the Fair Repair Act, S618. Symptom: Invalid Drive Specifications Treatment: Basic Check your cmos battery Check your IDE cable and connections Check your jumper settings Remove all other IDE connections but the drive in question Advanced Check This Out i got a 10Gb hard drive from ebay and it worked for a few minutes before it started clicking and it failed.
Some computers like a few Packard Bells I have dealt with have LBA and 32-bit mode turned off by default. Is there something I can do, some settings I can tweak somewhere where I can now use my external again on my computer. but if you lucky you got what you needed off it.
Again, sorry about the drive! http://www.mrseb.co.uk/ Sebastian Anthony Welcome to ET!
Ed, I'm genuinely missing your point. The point my article is meant to convey is this: When your drive dies, there are a few easy/low-cost (relative to the cost of professional Thank you to the guy who figured this out… you are my hero. That (obviously) only happens when the drive is exposed to (moist) air instead of being contained in it's sterile environment. I've had a better than 60 percent success rate with this method.From: jphillipsIf the drive is spinning and you are experiencing these kinds of errors, my experience has been that you
Hey, I am not going to sacrify my weekend, drive the 10, 20 miles to you, work on your computer and not be paid for at the very least the gas I know there has to be another way around this. i hope this drive is not a waste of money.anyway, what shall i do to get my moneys worth out of that 10Gb hard drive? http://bornsunsoft.com/solved-problem/solved-problem-with-either-cpu-hsf-or-gpu.html Any thoughts/suggestions?
This seemed to re-seat the needle head onto the disk, and my computer has worked great ever since. I ask my clients which files are most important to them. This is not a good idea, although it may have worked for a few people, I would not follow the herd if your data is important. Manufacturers don’t want a Fair Repair bill.