Home > Solved Question > Solved: Question About Connecting Power Supply To Video Card.

Solved: Question About Connecting Power Supply To Video Card.

It may also be a chip on the motherboard or the power supply which is overheating. If your slot has a latch, then make sure that it is fully latched down. It is a Floppy drive Power Plug. You can try to fix AGP instability by using a slower multiplier. Check This Out

Report asdfs- May 12, 2010 at 01:16 PM yh. Most likely, it is the CPU, in which case you (or your local repair shop) have to remove the cpu and add new thermal paste and re-seat it properly. http://www.newegg.com/Product/Produ...and use that with your drives - they don't need much power (current) - to free up one more spare larger molex connector for the PCI-E 6 pin to two molex Report • #2 Tubesandwires May 28, 2012 at 08:25:20 ✔ Best AnswerI looked for info about Quadro FX 3500 cards and found no manuals, except for Quadro models FX 3700 and weblink

If you happen to be enough of an electronics geek to own one then you can get an accurate reading that way. Fix #6: underclock your video card Some video cards are unstable if you run them at full speed. If none of the standard fixes work then things get more complicated. If you're having a hard time tracing down your problem, then it's worth your time to exclude the RAM and CPU as possible causes.

Checked every power management feature in MicroSoft XP. If there is a lot of dust in the heatsink then you can poke it out or blow it out with a can of compressed air. VGA video card outputs How to troubleshoot video card problems When a display adapter is having problems it can have all kinds of symptoms: crashes, hangs, freezes, graphics artifacts (display corruption), Hope this helps.

If you're having any problems with your video card, one of the first things you should do is download the latest display driver, uninstall the current display driver, and then install Cheers! My question is if the end coming from the PSU is right. http://www.tomshardware.com/answers/id-2020928/connecting-graphics-card-power-supply.html Computer starts up, power supply fan works, CPU fan works, Attatched side panel fan works.

You can see if AGP instability is giving you trouble by slowing down the AGP port. That way you know for sure that it's not the sound system which is responsible for your problems. You may be able to fix the problem by underclocking as shown in fix #6 or you may have a mechanical problem which you can handle as shown in fix #7. Thanks u Prakash View all 6 comments Report nisdog- Dec 14, 2008 at 02:36 AM this a display problem shot your computer off if you have another computer lying aroung open

Some video cards, especially ones having HDMI outputs have a digital audio input for the HDMI combined output.You have to be a little bit crazy to keep you from going insane. But if your video card is crashing or hanging then it's often difficult to find the cause because so many different problems can result in the same symptoms. its just easier for them to do 6+2 pin, so then you can use the same cable on a card with a 6 pin only, 8 pin only, 8 pin and Now ur bios will work.

There is no point in spending time trying to trace down the cause of video card problems until you've completed this initial step. his comment is here I'm going to go look around through some stuff and see if I can scrounge up a 6-pin cable somewhere first, before I attempt to use the Molex connectors. If the 12 volt value suddenly drops when you start up a 3D game, that's a bad sign. Otherwise you can resort to using the motherboard utilities.

now when I switch on the cpu, everything functions but nothing appears on the monitor. Usually the problem is software or hardware related but occasionally it's just a mechanical problem. If your sound is integrated into the motherboard, then the drivers can be downloaded from the company which manufactured the motherboard or from the maker of your computer. http://bornsunsoft.com/solved-question/solved-question-about-power-supply.html You need to install the chipset drivers to make sure that everything on your motherboard is working reliably and running at full speed.

Report puntojay- May 7, 2011 at 07:16 AM i have the same problem my monitor its a tv, free view and monitor all in 1. I also tried to change ram.Still cannot work. I hav an external graphics card.

If you're not sure what to do then you should just run through all of them.

Thread Status: Not open for further replies. Make sure you meet requirements...and that should fix your output issue as Ive had the seen this issue before. so it can not be graphics card. Make sure you have enough power first off by checking the specs on the card.

More resources Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Hardware Search the site Ok About Computer starts up, power supply fan works, CPU fan works, Attatched side panel fan works. I took a picture of how I *think* it should be set up: So you can see the longer end will connect to my PSU with the 6-pin, and the shorter navigate here There is a black plastic shrouded connector at the back of the card.http://www3.pny.com/QuadroPDFs/FX35...You can see 3 pins going into it from the board.

It's relatively easy and it may solve your problem. but NO image. Nothing had any effect. New power supply, fans won't turn just graphics card fan connected to motherboard How to connect this power supply to my graphics card How do i connect my graphics card to

Join over 733,556 other people just like you! Atleast a 450 is most likely required...and on top of that you may need the gpu power connector as mentioned above. Make sure you push the card fully into the slot. But in real life it's better if they are closer than that.

I only have one power supply cord plugged into it right now. It's not uncommon for the advanced part of the sound drivers to be a bit buggy and to cause system crashes. There's a standard set of fixes which you can try out to see if the problem goes away. That's especially likely to solve your problem if your computer has just been moved or you just built it and haven't gotten it to work yet.

I know the PSU might not be enough watts but if i were to crossfire i would then use the VGA 3 and VGA 4 for the second graphics card right?And

© Copyright 2017 bornsunsoft.com. All rights reserved.