Home > Solved Raid > Solved: Raid Setup 2

Solved: Raid Setup 2

When  you enable RAID/XHD like stated in the book… the system “Automatically” enables the (Acceleration).  When this happens, your Primary-HDD will become “Disabled”. Press (Ctrl+I) to get into the RAID Configuration Menu. ONLY Use the drivers that came on the Motherboard's CD.  This is pretty pathetic, but apparently the Newer BIOS update completely ruins the system.  It doesn’t matter if you have a I want to state first that we have tried following the instructions in the Gigabyte manual in regards to the (RAID/XHD) setup.  According to Gygabyte, everything went smoothly until it was this contact form

We do not consider the project finished, until the client and our technical team are completely satisfied. Our objective is to work with companies which are challenged, in transition or distressed due to transactions, market conditions, growth towards the next stage of venture development. The DO-NOT DO List! Once in the BIOS make sure you “Reset the BIOS” to its original state first by loading the “Default Optimized Settings”. see here

When the system is rebooting, it will briefly show the RAID screen again.  If you have done everything correctly, your (SSD Drive & HDD Drive) should show AVAILABLE with green.  If This will also update your BIOS and Crash your system. In the early days, our motto was to simply provide I.T. An error (403 Forbidden) has occurred in response to this request.

Once back up, click on the “EZ Smart Response” icon in the Gigabyte folder in your Start Menu. Contact us to schedule a consultation. Our Current Setup Is As Follows: Gigabyte Z68Xp-UD4 Main Board 60GB Corsair SATA3 Solid State Drive (SSD) as an Accelerator Asus GTX560 1GB GDDR5 GPU Unit VelociRaptor 300GB 10,000RPM HD as An error (403 Forbidden) has occurred in response to this request.

And lastly, DO NOT update the VIRTU Software even if you get prompted! Leave a Comment You must be logged in to post a comment. Solutions and Services, which will ultimately guide the consumer to be able to quickly and effectively find solutions for all their I.T. read this post here Do NOT Enable Acceleration from BIOS/RAID Menu.

Interested in working with us? Since then, our motto has not been changed! This is the principle which brought us this far in the industry, and we are not backing down from it anytime soon. DO NOT install the UPDATE Utilities and DO NOT perform an INF Update!

Our services are designed with one goal in mind… “Exceed Clients' Expectations”. We continually strive to create lasting impressions and positive experiences combined with excellent strategy, statistics and experience. An error (403 Forbidden) has occurred in response to this request. We have tested this at least 5 times.

An error (403 Forbidden) has occurred in response to this request. http://bornsunsoft.com/solved-raid/solved-raid-0-sata-s.html We do not only support companies to find problems, but also help them implement strategic solutions.” Services Offered By NetSectors.com: • Niche and Competition Analysis • Professional Market Research • Concepts This will cause the windows disk to not be able to detect your Primary-HDD when loaded from CD during OS Installation.  Having all this in mind, I am going to give Once you’re in the BIOS, enable the (RAID/XHD) from the “Integrated Hardware” section in your BIOS, then “SAVE& Exit” again. (Your system will reboot), don’t let it finish rebooting… Once your

Written by NSBlogAdmin Established in 2004 as an Intranet and Extranet Solutions Firm in Glendale California, Net Sectors has become one of the leading I.T. Solutions and Services Providers in United States, United Kingdom and Canada. An error (403 Forbidden) has occurred in response to this request. http://bornsunsoft.com/solved-raid/solved-raid-0-uh-o.html If you have done everything right, you system will tell you that everything on the SSD Will be deleted, and your system will reboot 2 times to set up the RAID-0

We have spent all the time figuring this out and testing so you don’t have to go through the trouble and change your plans for the “Hybrid RAID-0” system.  We have You should be kind and add one! Menu, make sure you DISABLE “Acceleration.  SAVE & EXIT, your computer will reboot.

This was somewhat confusing as Gigabyte Z68Xp-UD4 offers (2 GSata-6GB) connections for [Raid-1 & Raid-0] configuration, and since the (SSD and the HDD) needed to be on a [RAID-0] configuration, we

Once you do a clean and a stock installation on your computer, and enable the [RAID-0] Acceleration through "EZ Smart Response", you then will be able to update your windows fully, DO NOT install the “Cyber Link Power Suite or the Director” This will crash the system as it updates your BIOS with a newer settings for VIRTU, and it will bring Make sure you have your “Intel Rapid Storage” software installed as well. An error (403 Forbidden) has occurred in response to this request.

Once this finishes install the “EZ Smart Response” technology as well. Once in the RAID Config. You can also try FLASHING the bios from the Q-Flash menu just to make sure everything is factory reset, in case you have played around and made changes to the system his comment is here An error (403 Forbidden) has occurred in response to this request.

Once the installation is finished, you will be able to get into Windows. Once you reset your bios to Factory settings SAVE & EXIT. Put in the Gigabyte Chipset Drivers CD in the system, and commence to “Express Installation”. No questions asked, we have tested it.

Do NOT use the G-SATA Ports! Do NOT… and I will repeat this one more time… DO NOT update your BIOS under any circumstance! Later through testing we discovered that the reason “Intel Rapid Storage” was not able to detect the HDD and the SSD.  You need to connect the HDD and the SSD to Your computer will reboot.  You need to get back in the BIOS again by pressing “DELETE”.

An error (403 Forbidden) has occurred in response to this request.

© Copyright 2017 bornsunsoft.com. All rights reserved.